Plumbing problems can be a huge headache. Whether it’s a slow leak, clogged toilet, or any other plumbing issue,...
Water conservation is a hot topic in California. After all, we’re no strangers to droughts and hot weather.
But do you know how your water consumption compares with others?
With this checklist, you’ll be able to find out! Just run through this list and check off the various conservation measures you take. Afterward, you’ll have a clear understanding of where you stand in terms of water conservation, and how much money you save on water as well.
Let’s get started.
You might be surprised how much water you can save by just turning off the tap.
If you’re in the habit of leaving taps running while washing dishes or brushing teeth, it’s time to start practicing a new routine. If you take a few seconds to turn off the water when getting ready in the morning, you can easily save over 100 gallons of water per month.
Even taking a few seconds to turn off the tap (while shaving or brushing your teeth) can help conserve large amounts of H2O.
So if you’re in the habit of leaving water running, it’s probably time to change your ways.
Are you taking longer showers than necessary? Well, if so, you might not be aware of how much water you’re wasting.
In fact, you can save up to 1,000 gallons of water per month by just reducing your shower to five minutes.
If you can’t bring yourself to take a shorter shower or baths, make sure the temperature and pressure are at their optimal settings. That way you won’t waste any extra water but you’ll still be able to enjoy a warm shower.
If you have the time to clean up outside, consider using a broom instead of your hose.
Yes, it’ll be a bit more work. But as an added benefit, you’ll get to enjoy some fresh air and get some exercise in the process. Plus, you’ll save yourself a considerable amount of water. This is because hoses can use up to 1,000 gallons of water per hour!
So if you have a hose that’s hooked up to your house, take it off the hook and put a broom with an attached dustpan in its place.
You’ll get to clean up the same amount of dirt without wasting any water or energy. Plus, your water department will thank you for being such a considerate customer.
If your home was built before 1994, it’s likely that you’ve got some leaks in your system.
What can cause these leaks? Well, there are many possibilities. Maybe the leak is coming from an improperly installed hose bib. Or maybe it’s due to faulty plumbing behind walls.
The good news is that you can easily remedy these leaks by identifying and repairing them. For example, a hose bib leak can be fixed by simply tightening the screws in their place.
But if you don’t feel comfortable investigating plumbing issues yourself, or have no time to do so, then call up a plumber for a repair job. This way you’ll save yourself a ton in both time and effort.
One of the easiest ways to save water is by simply fixing dripping faucets.
While this may seem like a minor problem, even small drips can result in hundreds of gallons wasted each month. In fact, one leaky faucet can waste up to 7,000 gallons per year!
A lot of people don’t realize that the water you’re paying for doesn’t just come out of your faucet. It also runs down the drain, spending money and energy to no purpose.
So how can you fix your dripping faucets? Well, in many cases, all it takes is tightening up loose parts inside your fixture. Or maybe it’ll require replacing a worn washer.
Whatever the case, make sure to check your faucets every now and then for dripping leaks. This way you can save money in water bills and energy costs while keeping your home safe from water damage.
And most importantly, you can prevent any emergency plumbing situations from occurring as well.
Many people run their dishwashers with a smaller load than necessary.
This is because they don’t want to have to rinse off dirty pans or dishes before loading them into the machine.
But if you do this, then you’re wasting water and energy for no reason at all.
It’s better to always run your dishwasher on a full load so that you won’t waste any water or energy. And this way, your dishes will also remain cleaner after being washed.
If you recently bought a new appliance, then consider replacing your old one with a low-flow model.
Low-flow models use up to 25% less water than older appliances. And they can save you between $30 and $80 per year in reduced energy costs. They are also kinder to the environment since they reduce carbon emissions significantly.
You can find low-flow models for all kinds of appliances. They provide the same household functionality as higher-end models, but they use less water and energy to do so.
So if you’re looking to replace some of your home’s major appliances (or if your toilet doesn’t function properly), look into getting a model with low-flow technology. You’ll be saving both money and energy in the process.
Water conservation isn’t always easy.
But Plumbing Squad can make sure you’re leak-free and can even install water-conserving appliances as well. That way you’ll easily meet all water conservation efforts for California residents.
Contact us today at (866) 324-9553 or on our contact page as well.
For plumbing help whenever you need, contact the Plumbing Squad now at (866) 324-9553.